Verified MS-100 Dumps Q&As - MS-100 Test Engine with Correct Answers
Pass Your MS-100 Dumps as PDF Updated on 2024 With 431 Questions
Career Opportunities (Job Roles & Possible Income)
Microsoft has become one of the biggest certification providers in the world. Its certificates are respected by the top companies in the industry, so if you want to give your career a much-needed boost, it is recommended that you go for one of them. After obtaining Microsoft 365 Certified: Enterprise Administrator Expert, the professionals can apply for one of the following job roles:
- Office Administrator
- Information Technology Specialist Software
- Office Engineer
- Information Technology Manager
- Network Administrator
- System Administrator Tier II
All of these positions offer a decent salary for the individuals with this expert-level certification. For instance, an average annual income of an Office Administrator ranges from $32,000 to $77,000, while a Network Administrator can earn an average of $43,000 to $83,000, according to PayScale.com. Note that the exact remuneration depends on multiple factors such as your level of experience in the field and the type of organization you work for.
The Microsoft MS-100 exam covers a wide range of topics, including managing user identity and roles, managing access and authentication, implementing and managing Azure AD Connect, managing Microsoft 365 subscriptions and licenses, managing Microsoft 365 services, and implementing and managing device and application management. It requires a deep understanding of Microsoft 365 services and the ability to apply that knowledge to real-world scenarios.
Skills Outline (Exam Topics)
To increase your chances of passing Microsoft MS-100 at the first attempt, you need to have a good comprehension of the exam topics, which are the following:
- Managing Authentication and Access
This entails one’s skills in managing authentication (in particular, developing an authentication approach; customizing authentication; applying an authentication approach; handling and monitoring authentication); applying Multi-Factor Authentication (in particular, developing an MFA solution; customizing MFA for users and apps; administering MFA and reporting MFA utilization); customizing application access (in particular, customizing application registration within Azure AD; customizing Azure AD application proxy; uploading apps of enterprise in Azure AD); executing access for Microsoft 365 workloads outside users; developing guest accounts; developing solutions for outside access; handling the outside collaboration settings).
- Planning Office 365 Workloads and Applications
This topic requires the students’ skills in planning for Office 365 workload deployment (including defining hybrid requirements; planning data flow and interconnection for each workload; planning for Microsoft 365 workload interconnection; plan migration approach for workloads; preparing workloads for upcoming migrations and deployments) as well as planning Microsoft 365 Apps deployment (including planning for Office for the web; planning for Microsoft 365 Apps for an enterprise; handling Office software downloads; planning Microsoft 365 Apps for enterprise deployment, etc.).
- Managing User Identity Roles
Here the examinees should know how to develop an identity approach (in particular, assess synchronization requirements; evaluate identity management requirements; assess authentication requirements); plan identity synchronization using Azure AD Connect (in particular, develop directory synchronization; execute directory synchronization using Azure endpoints, federation services directory services); handle identity synchronization with the help of Azure AD (in particular, check Azure AD Connect Health; handle manage Azure AD Connect synchronization; customize object filters; customize password sync; execute multi-forest AD Connect scenarios).
Additionally, the candidates need to possess skills in handling Azure AD identities (including planning Azure AD identities; executing self-service password reboot for Azure AD; handling access reviews; handling product licenses, groups, users, passwords) as well as handling user roles (including planning user roles; allocating roles in workloads; customizing administrative accounts; customizing RBAC in Azure AD; assign admin rights; handle manage admin roles; plan compliance and security roles for Microsoft 365).
- Designing and Implementing Microsoft 365 Services
Within this objective, the test takers need to demonstrate that they have the competency in managing domains (this includes adding and customizing extra domains; customizing user identities for a new domain name; developing configuration for a domain name; setting a major domain name; verifying a custom domain); planning Microsoft 365 implementation (this includes planning for Microsoft 365 on-premises infrastructure as well as planning identity authentication and solution); planning migration of data and users (this includes determining what data is to be migrated; defining mailboxes and users that are to be migrated; planning migration of on-prem groups and users; importing PST Files).
In addition, the applicants should be proficient in setting up Microsoft 365 subscription and tenancy (customizing tenant and subscription roles as well as workload settings; assessing Microsoft 365 for an enterprise; planning and developing tenant; updating current subscriptions to Microsoft 365; monitoring license allocations) and handling Microsoft 365 tenant and subscription health (handling service health alerts; developing and handling service requests; developing inbound service health response plan; customizing and reviewing reports, such as OMS, BI, Microsoft 365 reporting; scheduling and assessing compliance and security reports; scheduling and assessing utilization metrics).
NEW QUESTION # 243
Your company has 20 employees, Each employees has a mailbox hosted in Outlook.com.
The company purchases a Microsoft 365 subcription.
You plan to migrate all the mailboxes to Microsoft 365.
You need to recommend which type of migration to use for the mailboxes.
What should recommend?
- A. IMAP migration
- B. Minimal hybrid migration
- C. Staged migration
- D. Cutover migration
Answer: A
Explanation:
Explanation
To migrate mailboxes from Outlook.com to Office 365, you need to use the IMAP migration method.
After you've added your users to Office 365, you can use Internet Message Access Protocol (IMAP) to migrate email for those users from their IMAP-enabled email servers.
In the Microsoft 365 admin center, go to to start migrating IMAP enabled emails.
The email migrations page is pre-configured for migrations from Gmail, Outlook, Hotmail and Yahoo. You can also enter your own IMAP server name and connection parameters to migrate from an email service that is not listed.
References:
https://docs.microsoft.com/en-us/exchange/mailbox-migration/migrating-imap-mailboxes/imap-migration-in-the
NEW QUESTION # 244
You need to assign User2 the required roles to meet the security requirements and the technical requirements.
To which two roles should you assign User2? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. the Microsoft 365 Records Management role
- B. the Microsoft 365 Security Reader role
- C. the Exchange Online Help Desk role
- D. the Exchange Online Compliance Management role
- E. the Exchange View-only Organization Management role
Answer: B,E
Explanation:
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answer and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. When you are ready to answer a question, click the Overview Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York.
The offices have the users and devices shown in the following table.
Contoso recently purchased a Microsoft 365 E5 subscription.
Existing Environment
The network contains an Active directory forest named contoso.com and a Microsoft Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
You recently configured the forest to sync to the Azure AD tenant.
You add and then verify adatum.com as an additional domain name.
All servers run Windows Server 2016.
All desktop computers and laptops run Windows 10 Enterprise and are joined to contoso.com.
All the mobile devices in the Montreal and Seattle offices run Android. All the mobile devices in the New York office run iOS.
Contoso has the users shown in the following table.
Contoso has the groups shown in the following table.
Microsoft Office 365 licenses are assigned only to Group2.
The network also contains external users from a vendor company who have Microsoft accounts that use a suffix of @outlook.com.
Requirements
Planned Changes
Contoso plans to provide email addresses for all the users in the following domains:
* East.adatum.com
* Contoso.adatum.com
* Humongousinsurance.com
Technical Requirements
Contoso identifies the following technical requirements:
* All new users must be assigned Office 365 licenses automatically.
* The principle of least privilege must be used whenever possible.
Security Requirements
Contoso identifies the following security requirements:
* Vendors must be able to authenticate by using their Microsoft account when accessing Contoso resources.
* User2 must be able to view reports and schedule the email delivery of security and compliance reports.
* The members of Group1 must be required to answer a security question before changing their password.
* User3 must be able to manage Office 365 connectors.
* User4 must be able to reset User3 password.
NEW QUESTION # 245
Your company has a Microsoft 365 subscription that contains the users shown in the following table.
You need to identify which users can perform the following administrative tasks:
Modify the password protection policy.
Create guest user accounts.
Which users should you identify for each task? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-password-ban-bad-on-premises-operations
NEW QUESTION # 246
You have a new Microsoft 365 E5 tenant.
Enable Security defaults is set to Yes.
A user signs in to the tenant for the first time.
Which multi-factor authentication (MFA) method can the user use, and how many days does the user have to register for MFA? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 247
You recently migrated your on-premises email solution to Microsoft Exchange Online and are evaluating which licenses to purchase.
You want the members of two groups named IT and Managers to be able to use the features shown in the following table.
The IT group contains 50 users. The Managers group contains 200 users.
You need to recommend which licenses must be purchased for the planned solution. The solution must minimize licensing costs.
Which licenses should you recommend?
- A. 200 Microsoft 365 E3 and 50 Microsoft 365 E5
- B. 250 Microsoft 365 E5 only
- C. 250 Microsoft 365 E3 only
- D. 50 Microsoft 365 E 3 and 200 Microsoft 365 E5
Answer: A
Explanation:
Explanation
Microsoft Azure Active Directory Privileged Identity Management requires an Azure AD Premium P2 license.
This license comes as part of the Microsoft 365 E5 license. Therefore, we need 50 Microsoft 365 E5 licenses for the IT group.
Conditional Access requires the Azure AD Premium P1 license. This comes as part of the Microsoft E3 license. Therefore, we need 200 Microsoft 365 E3 licenses for the Managers group.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/subscription-requiremen
NEW QUESTION # 248
You have several Microsoft SharePoint document libraries in your on-premises environment.
You have a Microsoft 365 tenant that has directory synchronization implemented.
You plan to move all the document libraries to SharePoint Online.
You need to recommend a migration strategy for the document libraries.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/sharepointmigration/how-to-use-the-sharepoint-migration-tool
NEW QUESTION # 249
You have a hybrid deployment of Microsoft 365 that contains the users shown in the following table.
You have an on-premises web app named App
You configure an Azure Active Directory (Azure AD) Application Proxy.
You add an Application Proxy entry for AppA as shown the exhibit. (Click the Exhibit tab.)
You assign the AppA enterprise application in Azure to Group2.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 250
Your network contains an on premises Active Directory domain named contoso.com. The domain contains five domain controllers.
Your company purchases Microsoft 365 and creates a Microsoft Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
You plan to establish federation authentication between on premises Active Directory and the Azure AD tenant by using Active Directory Federation Services (AD FS).
You need to establish the federation.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point
Answer:
Explanation:
Explanation:
The on-premises Active Directory domain is named contoso.com. Before you can configure federation authentication between on-premises Active Directory and the Azure AD tenant, you need to add the domain contoso.com to Microsoft 365. You do this by adding a custom domain name.
The next step is to establish the federation. You can configure AD FS by using Azure AD Connect.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-install-custom#configuring-federation-with-ad-fs
NEW QUESTION # 251
You have a Microsoft 365 subscription.
You need to provide an administrator named Admin1 with the ability to place holds on mailboxes, SharePoint Online sites, and OneDrive for Business locations. The solution must use the principle of least privilege.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/permissions-in-the-security-and-compliance-center
NEW QUESTION # 252
You have the Microsoft Azure Active Directory (Azure AD) users shown in the following table.
Your company uses Microsoft Intune.
Several devices are enrolled in Intune as shown in the following table.
The device compliance policies in Intune are configured as shown in the following table.
You create a conditional access policy that has the following settings:
* The Assignments settings are configured as follows:
- Users and groups: Group1
- Cloud apps: Exchange Online
- Conditions: Include All device state, exclude Device marked as compliant
* Access controls is set to Block access.
For each of the following statements, select yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1:
Yes. User1 is in Group1. The Conditional Access Policy applies to Group1. The Conditional Access Policy blocks access unless the device is marked as compliant.
BitLocker is disabled for Device1. Device1 is in Group3 which is assigned device Policy1. The BitLocker policy in Policy1 is 'not configured' so BitLocker is not required.
Therefore, Device1 is compliant so User1 can access Exchange online from Device1.
Box 2:
No. User1 is in Group1. The Conditional Access Policy applies to Group1. The Conditional Access Policy blocks access unless the device is marked as compliant.
BitLocker is disabled for Device2. Device2 is in Group4 which is assigned device Policy2. The BitLocker policy in Policy2 is 'Required so BitLocker is required.
Therefore, Device2 is not compliant so User1 cannot access Exchange online from Device2.
Box3:
Yes. User2 is in Group2. The Conditional Access Policy applies to Group1. The Conditional Access Policy does not apply to Group2. So even though Device2 is non-compliant, User2 can access Exchange Online using Device2 because there is no Conditional Access Policy preventing him/her from doing so.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/conditions
NEW QUESTION # 253
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Lab information
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: m3t^We$Z7&xy
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 11440873
Your organization plans to start a new collaborative project that will contain email and chat communications, as well as regular meetings.
You need to create a team in Microsoft Teams for the planned project. The team must have the following configurations:
* Be named Project1.
* Have an owner named Lee Gu.
* Have a channel named Channel1.
To answer, sign in to the Microsoft 365 portal.
Answer:
Explanation:
See explanation below.
Explanation
You need to create a team. You can create a team in the Microsoft Teams Admin Center or in the Microsoft Teams app. However, to be able to specify the team owner when creating the team, you need to use the Teams Admin Center.
1. Go to the Microsoft Teams Admin Center.
2. In the left navigation pane, expand the Teams section and select 'Manage Teams'.
3. Click the '+ Add' link to add a new team.
4. Give the team the name Project1.
5. In the Team Owner field, remove your name which is there by default and add Lee Gu.
6. Click the 'Create a team' button to create the team.
7. In the teams list, select the Project1 team.
8. Click on 'Channels'.
9. Click the '+ Add' link to add a new channel.
10. Give the channel the name Channel1.
11. Click the Apply button to create the channel.
NEW QUESTION # 254
You need to meet the application requirement for the Office 365 ProPlus applications.
You create a XML file that contains the following settings.
Use the drop-down menus to select the choice that complete each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 255
Your company recently purchased a Microsoft 365 subscription.
You enable Microsoft Azure Multi-Factor Authentication (Ml A) for all 500 users in the Azure Active Directory (Azure AD) tenant.
You need to generate a report that lists all the users who completed the Azure MFA registration process.
What is the best approach to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.
- A. From Azure Cloud Shell, run the Get-AzureADUser cmdlet.
- B. From Azure Cloud Shell, run the Get-MsolUser cmdlet
- C. From the Azure Active Directory admin center, use the Risky sign-ins blade.
- D. From the Azure Active Directory admin center, use the MFA Server blade.
Answer: B
Explanation:
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-reporting
NEW QUESTION # 256
You have a Microsoft 365 tenant that contains a Microsoft Power Platform development environment named Dev1, a Power Platform production environment named Prod1, and two users named User1 and User2.
You need to assign roles to the users to meet the following requirements:
* User1 must have full access permissions to Dev1 and Prod1.
* User2 must be able to acquire and assign Microsoft Power BI licenses.
The solution must use the principle of least privilege
Answer:
Explanation:
NEW QUESTION # 257
You have a Microsoft Azure Active Directory (Azure AD) tenant that contains the users shown in the following table.
Your company uses Windows Defender Advanced Threat Protection (ATP). Windows Defender ATP contains the roles shown in the following table.
Windows Defender ATP contains the device groups shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/user-roles
https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/rbac
NEW QUESTION # 258
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
You may now click next to proceed to the lab.
Lab information
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
[email protected]
Microsoft 365 Password: 3&YWyjse-6-d
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only:
Lab Instance: 10887751
Your company has a web application named App1.
The company plans to publish App1 by using a URL of https://app1.contoso.com.
You need to register App1 to your Microsoft Office 365 tenant.
Answer:
Explanation:
You need to register App1 in Azure Active Directory.
1. Go to the Azure Active Directory admin center.
2. Select Azure Active Directory.
3. Select 'App registrations'.
4. Click the 'New registration' link.
5. Enter the name App1.
6. Click the Register button.
7. To add the URL to App1, select App1 in the list of registered apps.
8. In the properties page of App1, select Branding.
9. Enter the URL https://app1.contoso.com in the 'Home page URL' box.
10. Click Save to save the changes.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/develop/quickstart-register-app
NEW QUESTION # 259
You have a Microsoft 365 Enterprise E5 subscription.
You need to enforce multi-factor authentication on all cloud-based applications for the users in the finance department.
What should you do?
- A. Create an activity policy.
- B. Create a session policy.
- C. Create a new app registration.
- D. Create a conditional access policy.
Answer: D
Explanation:
Section: [none]
Explanation:
You can configure a conditional access policy that applies to the Finance department users. The policy can be configured to 'Allow access' but with multi-factor authentication as a requirement.
The reference below explains how to create a conditional access policy that requires MFA for all users. To apply the policy to finance users only, you would select Users and Group in the Include section instead of All Users and then specify the finance department group.
Note:
There are several versions of this question in the exam. The question has two possible correct answers:
1. Create a sign-in risk policy.
2. Create a conditional access policy.
Other incorrect answer options you may see on the exam include the following:
1. Create an activity policy.
2. Create a session policy.
3. Create an app permission policy.
4. Configure the sign-in status for the user accounts of the finance department users.
5. Assign an Enterprise Mobility + Security E5 license to the finance department users.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/howto-conditional-access-policy-all- users-mfa
NEW QUESTION # 260
Your network contains an Active Directory domain and a Microsoft Azure Active Directory (Azure AD) tenant.
The network uses a firewall that contains a list of allowed outbound domains.
You begin to implement directory synchronization.
You discover that the firewall configuration contains only the following domain names in the list of allowed domains:
* *.microsoft.com
* *.office.com
Directory synchronization fails.
You need to ensure that directory synchronization completes successfully.
What is the best approach to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.
- A. From the firewall, modify the list of allowed outbound domains.
- B. Deploy an Azure AD Connect sync server in staging mode.
- C. From Azure AD Connect, modify the Customize synchronization options task.
- D. From the firewall, create a list of allowed inbound domains.
- E. From the firewall, allow the IP address range of the Azure data center for outbound communication.
Answer: A
Explanation:
Section: [none]
Explanation:
Azure AD Connect needs to be able to connect to various Microsoft domains such as login.microsoftonline.com. Therefore, you need to modify the list of allowed outbound domains on the firewall.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/reference-connect-ports
NEW QUESTION # 261
You create a Microsoft 365 subscription.
You plan to deploy Microsoft Office 365 ProPlus applications to all the client computers at your company.
You prepare the following XML file for the planned deployment.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://docs.microsoft.com/en-us/deployoffice/configuration-options-for-the-office-2016-deployment-tool#updates-element
https://docs.microsoft.com/en-us/deployoffice/overview-of-update-channels-for-office-365-proplus
NEW QUESTION # 262
You have a Microsoft 365 subscription. All users have client computers that run Windows 10 and have Microsoft Office 365 ProPlus installed.
Some users in the research department work for extended periods of time without an Internet connection.
How many days can the research department users remain offline before they are prevented from editing Office documents?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
After 30 days, Microsoft Office 365 ProPlus will go into reduced functionality mode. When this happens, users will be able to open files but they won't be able to edit them.
As part of the installation process, Office 365 ProPlus communicates with the Office Licensing Service and the Activation and Validation Service to obtain and activate a product key. Each day, or each time the user logs on to their computer, the computer connects to the Activation and Validation Service to verify the license status and extend the product key. As long as the computer can connect to the Internet at least once every 30 days, Office remains fully functional. If the computer goes offline for more than 30 days, Office enters reduced functionality mode until the next time a connection can be made.
Reference:
https://docs.microsoft.com/en-us/deployoffice/overview-of-licensing-and-activation-in-office-365-proplus
NEW QUESTION # 263
You need to create the UserLicenses group. The solution must meet the security requirements.
Which group type and control method should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/governance/access-reviews-overview
NEW QUESTION # 264
You have a Microsoft 365 E5 subscription and a hybrid deployment of Microsoft Exchange. The deployment contains TOO users who have on-premises mailboxes and 100 users who have mailboxes in Exchange Online.
You enable Microsoft Teams and assign a Microsoft Teams license to each user.
You need to ensure that the users who have on-premises mailboxes can use Microsoft Teams. All Microsoft Teams chat data must be searchable by using Content search in the Security fit Compliance admin center.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 265
Your on-premises network contains an Active Directory domain that syncs with an Azure Active Directory (Azure AD) tenant named contoso.com by using Azure AD Connect. Your company purchases another company that has an on-premises Active Directory domain named lrtwareinc.com. You need to sync litwarein.com with contoso.com. What should you install in the litwarein.com domain?
- A. an Azure AD Connect instance in staging mode
- B. an Azure AD Connect provisioning agent
- C. an active instance of Azure AD Connect
- D. an Azure AD application proxy connector
Answer: B
NEW QUESTION # 266
Your network contains two disconnected on-premises Active Directory forests named adatum.com and contoso.com.
You have an Azure AD tenant named nwtraders.com
You need to sync the on-premises forests to nwtraders.com. The solution must meet the following requirements:
* Provide the ability to connect to adatum.com and contoso.com.
* Provide support for Microsoft Exchange hybrid.
* Provide the ability to sync device objects.
* Minimize administrative effort.
Answer:
Explanation:
NEW QUESTION # 267
Your network contains an Active Directory domain and a Microsoft Azure Active Directory (Azure AD) tenant.
You implement directory synchronization for all 10.000 users in the organization.
You automate the creation of 100 new user accounts.
You need to ensure that the new user accounts synchronize to Azure AD as quickly as possible Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct select ion is worth one point.
Answer:
Explanation:
Explanation
Azure AD Connect synchronizes Active Directory to Azure Active Directory on a schedule. The minimum time between synchronizations is 30 minutes.
If you want to synchronize changes to Active Directory without waiting for the next sync cycle, you can initiate a sync by using the Start-AdSyncSyncCycle. The Delta option synchronizes changes to Active Directory made since the last sync. The Full option synchronizes all Active Directory objects including those that have not changed.
Reference:
https://blogs.technet.microsoft.com/rmilne/2014/10/01/how-to-run-manual-dirsync-azure-active-directory-sync-u
NEW QUESTION # 268
......
Pass Microsoft MS-100 Exam Info and Free Practice Test: https://actualtests.vceengine.com/MS-100-vce-test-engine.html
