300-425 100% Guarantee Download 300-425 Exam PDF Q&A [May 14, 2023]
Get 300-425 Actual Free Exam Q&As to Prepare for Your Cisco Certification
NEW QUESTION # 34
Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?
- A. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
- B. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.
- C. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
- D. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.
Answer: C
Explanation:
NEW QUESTION # 35
Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)
- A. ladder
- B. spirit level
- C. PoE battery
- D. access point
- E. tall tripod
- F. goggles
Answer: C,D,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/81/design/guide/b_mesh_81/Site_Preparation_and_Planning.html
NEW QUESTION # 36
Which statement about creating a mobility group is true, excluding mobility anchors?
- A. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.
- B. Each WLC must use the same mobility name and be defined as a peer in each other's static mobility members list.
- C. The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
- D. A mobility groups does not require all WLCs in the group to use the same virtual IP address.
Answer: A
Explanation:
NEW QUESTION # 37
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
- A. It is an IPsec tunnel with control path and data path.
- B. It is a CAPWAP tunnel with control path and data path.
- C. It is an IPsec tunnel with control path only.
- D. It is a CAPWAP tunnel with data path only.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/mobility.html
NEW QUESTION # 38
Refer to the exhibit.
A WLC SSO pair is set up. Which failure scenario causes a split-brain scenario?
- A. One distribution port on the active WLC is down.
- B. VSL is down.
- C. Two distribution ports on the active WLC are down.
- D. RP is down.
Answer: B
NEW QUESTION # 39
A network engineer needs to create a wireless design to bridge wired IP surveillance cameras m the parking lot through a mesh AP To which operate mode of the AP should the cameras connect?
- A. RAP
- B. local
- C. MAP
- D. FlexConnect
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/mesh-access-points.html
NEW QUESTION # 40
During a post deployment site survey, issues are found with non-Wi-Fi interference. What should the engineer use to identify the source of the interference?
- A. wireless intrusion prevention
- B. Cisco Spectrum Expert
- C. Wireshark
- D. network analysis module
Answer: B
Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/spectrum-expert/product_data_sheet0900aecd807033c3.html
NEW QUESTION # 41
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?
- A. controller with the lowest percent of associated APs per license capacity
- B. controller with the least CPU utilization over the last reporting period
- C. controller with the most available AP free license capacity
- D. controller with the least number of associated APs
Answer: D
Explanation:
https://mrncciew.com/2013/04/07/ap-failover/
NEW QUESTION # 42
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
So max 2 will be supported on an AP.
NEW QUESTION # 43
Which two statements indicate a valid association mode for NTP synchronization? (Choose two.)
- A. The client listens to NTP broadcasts.
- B. The client creates a VPN tunnel to an NTP server.
- C. The client multicasts NTP requests.
- D. The client broadcasts NTP requests.
- E. The client polls NTP servers for time.
Answer: A,E
NEW QUESTION # 44
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
- A. no support for 802.11r
- B. fewer antennas than laptops
- C. lower data rates than laptops
- D. higher data rates than laptops
- E. no support for 802.11ac
Answer: B,C
Explanation:
NEW QUESTION # 45
An engineer must perform an assessment of a customer LAN for a future IEEE 802.llac Wave 2 wireless deployment. All access switches are Fast Ethernet-capable only, and the wired infrastructure between existing APs and access switches is based on the CAT 6A standard Which two actions provide maximum support of Osco 3800 Series access points? (Choose two)
- A. Replace the existing switches with mGig switches.
- B. Ensure that cable distances between access switches and APs are not longer than 55 meters.
- C. Replace the existing wiring infrastructure with the CAT-7E wiring standard.
- D. Replace the existing switches with gigabit switches with 10 G uplinks.
- E. Ensure that cable distances between access switches and APs are not longer than 100 meters
Answer: A,D
NEW QUESTION # 46
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?
- A. CCKM
- B. SKC
- C. 802.11r
- D. OKC
Answer: D
Explanation:
NEW QUESTION # 47
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
So, each AP will have 25 clients. Minimum 4 APs are sufficient.
NEW QUESTION # 48
How should the concept of mobility domains and mobility groups be explained to a customer?
- A. if WLCs are in same mobility domain, they communicate with each other. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
- B. If WLCs are in the same mobility domain, they communicate with each other but. if an anchor WLC ® present, it must: be in the same mobility domain for communication to be possible.
- C. A mobility group does not constrain the distribution of security context of a client and also does not constrain AP fail-over between controllers when the WLCs are in the same mobility domain.
- D. WLCs do not need to be in the same mobility domain to communicate with each other Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
Answer: A
NEW QUESTION # 49
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
- A. perimeter only
- B. indoor and outdoor
- C. perimeter and corner
- D. corner only
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS-DG/wifich5.html
NEW QUESTION # 50
Refer to the exhibit.
Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
- A. It presents the recommended number of APs for the selected coverage area based on the selections made.
- B. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
- C. It shows the map editor feature in Cisco Prime Infrastructure.
- D. Planning mode requires a special license in Cisco Prime Infrastructure.
- E. It shows the planning mode feature in Cisco Prime Infrastructure.
Answer: A,E
Explanation:
NEW QUESTION # 51 
Refer to the exhibit. A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client roaming behavior?
- A. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.
- B. Controllers do not exchange mobility control messages (over UDP port 16666) and the client database, entry is not moved from the original controller to the new conrtoller.
- C. Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.
- D. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.
Answer: A
NEW QUESTION # 52
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client with the worst RF characteristics
- B. the client that is used most by the company
- C. the client that is used least by the company
- D. the client that has the highest RF properties
Answer: B
Explanation:
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points
NEW QUESTION # 53
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?
- A. continuous -67 dBm coverage from one access point
- B. overlapping -67 dBm coverage from two access points
- C. overlapping -72 dBm coverage from two access points
- D. continuous -72 dBm coverage from one access point
Answer: A
Explanation:
Explanation
So -67dBm covers both Data & Voice with a single AP
NEW QUESTION # 54
......
The Cisco 300-425 exam is a certification exam that is designed to test a candidate's knowledge and skills related to designing enterprise wireless networks using Cisco technologies. This exam is part of the Cisco Certified Specialist - Enterprise Wireless Design certification track and is intended for individuals who want to demonstrate their ability to plan, design, and implement wireless networks for their organization. The exam covers a range of topics related to wireless network design, including site surveys, high-density deployments, and wireless LAN (WLAN) security.
Certification Paths
In case you want to become a certified wireless engineer but you don't know where to start, taking 300-425 exam is a good decision. First of all, it immediately brings one the Cisco Certified Specialist — Enterprise Wireless Design certification. Then, a candidate can earn the professional-level CCNP Enterprise certificate by passing the core test 350-401 ENCOR that focuses on implementing and operating Cisco Enterprise network core technologies. Other concentration exams one can choose to pass instead of 300-425 include 300-410, 300-415, 300-420, 300-430, 300-435.
Moreover, this is not the final point of the certification journey. With CCNP Enterprise, the individual becomes eligible for higher-level CCIE Enterprise Wireless and CCIE Enterprise Infrastructure certificates.
300-425 Questions Truly Valid For Your Cisco Exam: https://actualtests.vceengine.com/300-425-vce-test-engine.html
