A Fully Updated 2023 220-1001 Exam Dumps - PDF Questions and Testing Engine
Easy Success CompTIA 220-1001 Exam in First Try
NEW QUESTION # 246
A user is having a problem with printing a specific document type.
The network printer OCP shows that the printer is online with no errors. Other users are not having the
same issue. The user sends the document to another printer and the document prints.
Which of the following should a technician do FIRST in troubleshooting the problem?
- A. Have each user send the same document to the correct printer queue.
- B. Stop and restart the print server queues, and then have the user resend the document.
- C. Stop and restart the PC print spooler service.
- D. Verify the user is sending the document to the correct printer queue.
Answer: D
NEW QUESTION # 247
Which of the following is a common use for NAT?
- A. Hiding the network portion of an IPv4 address
- B. Automatically assigning network addresses
- C. Resolving alphanumeric names to addresses
- D. Connecting multiple devices through a single public IP address
Answer: D
NEW QUESTION # 248
A user reports the laser printer has stopped printing. When performing a test print, the page comes out mostly blank with ghosting images. A technician verifies a new toner cartridge was installed several weeks ago. There are no errors in the system's log. Which of the following is the MOST likely reason for the printer issue?
- A. There is no connectivity between the printer and the computer.
- B. There is a stuck print job in the print queue.
- C. The fuser has failed and requires replacement.
- D. Printer drivers are not installed on the computer.
Answer: C
NEW QUESTION # 249
A user reports a corporate computer, which was recently moved, can no longer print to the default printer. A technician verifies all the cables are connected, power cycles the printer, and restarts the PC but still cannot print to the default printer. The technician notices an identical printer in Devices and Printers that ends with (copyl). The (copyl) printer prints without issue. Which of the following MOST likely caused the issue when the computer was moved?
- A. The user moved the printer's USB cable to a different USB port on the desktop.
- B. The Microsoft XPS printer was set as the default printer after the PC came back up.
- C. Updates loaded when the PC was shut down, which updated the printer drivers.
- D. The user did not shut down the computer correctly before moving it and unplugging the power.
Answer: B
NEW QUESTION # 250
An employee's mobile device no longer charges, and the employee believes the battery is bad. A technician tests the mobile device and finds it will charge on a wireless charging pad but not when it is connected to a charging cable. Other devices charge without issue when the cable is used. Which of the following should the technician perform FIRST to resolve the issue?
- A. Send the device for service and give the employee a loaner
- B. Replace the mobile device's battery
- C. Issue a new charging cable to the employee
- D. Clean out the charging port on the device
Answer: D
NEW QUESTION # 251
A technician is concerned that a newly pulled Cat 5e run is longer than recommended by specification. Which of the following tools should the technician use to measure the length of the run?
- A. Probe
- B. Multimeter
- C. Tone generator
- D. Cable tester
Answer: D
NEW QUESTION # 252
A technician receives a laptop due to its low performance and intermittent S.M.A.R.T. errors on boot up. Which of the following is the NEXT step the technician should take to diagnose the issue?
- A. Repair the OS installation on the existing drive.
- B. Copy the user's profile folder to an external drive.
D18912E1457D5D1DDCBD40AB3BF70D5D - C. Low-level format the existing drive.
- D. Immediately replace the failing drive.
Answer: B
NEW QUESTION # 253
A technician is troubleshooting a computer that powers off when it is placed under a heavy load Hardware diagnostics show the CPU reaches a maximum temperature of 60BC Which of the following should the technician perform NEXT?
- A. Install a higher-wattage power supply
- B. Install additional case fans
- C. Reapply thermal paste to the heat sink
- D. Upgrade to a water cooling system
Answer: D
NEW QUESTION # 254
A sales executive's personal laptop occasionally freezes while checking email.
Which of the following should a technician do FIRST?
- A. Run hardware diagnostics.
- B. Request details about the problem.
- C. Consider the corporate policy.
- D. Check the network connectivity.
Answer: D
NEW QUESTION # 255
A technician is setting up a Windows mobile device for a user who had trouble reading text on a previous device, especially at night.
Which of the following adjustments would be MOST appropriate?
- A. Use the magnifier.
- B. Increase the resolution.
- C. Use haptic feedback.
- D. Utilize text-to-speech.
Answer: A
NEW QUESTION # 256
Which of the following cloud computing concepts is used when a company increases the number of web servers during peak usage times?
- A. Measured service
- B. Resource pooling
- C. Rapid elasticity
- D. Application streaming
Answer: A
NEW QUESTION # 257
Drag each mobile technology to the description of its use. Some answers will not be used.
Answer:
Explanation:
Explanation
1 - IR
2 - Bluetooth
3 - NFC
4 - Tethering
NEW QUESTION # 258
Which of the following is a type of reversible connector?
- A. USB-C
- B. Molex
- C. eSATA
- D. RJ45
Answer: D
NEW QUESTION # 259
A user experience a paper jam when printing a 500-page, double-side report. A technician clears the paper jam and inspects the printer for any remaining paper. The technician then powers the printer for any remaining paper. The technician then powers the printer off and back on. The printers LCD display says it is ready, and cables are securely connected. The user attempts to print the report again, but the printer still does not print. It also shows no indication of any change. Which of the following troubleshooting steps should the technician attempt FIRST?
- A. Try reinstalling the print driver tor the printer
- B. Restart the print spooler service and inspect the queue.
- C. Replace the drum and loner for the printer.
- D. Remove the printer memory and reseat it in the socket.
- E. Disassemble the printer body and look for further paper jams.
Answer: B
NEW QUESTION # 260
A computer that had been running properly for about three years no longer boots A technician observes the computer attempts to pass POST but it beeps three times before crashing. The computer then attempts to boot again and repeats the process. Which of the following is MOST likely the cause of the problem?
- A. Malfunctioning memory modules
- B. Incorrect memory type installed
- C. Mismatched memory speed type
- D. Improperly seated memory modules
Answer: D
NEW QUESTION # 261
Drag each mobile technology to the description of its use. Some answers will not be used.
Answer:
Explanation:
NEW QUESTION # 262
An end user has signed up to use a web-based calendar application. Which of the following solutions has the user purchased?
- A. laaS
- B. PaaS
- C. DaaS
- D. SaaS
Answer: D
NEW QUESTION # 263
A technician upgraded the CPU, and now the system fails to stay powered on for more than 30 seconds.
Which of the following components should be checked?
- A. Power supply
- B. CMOS battery
- C. Memory
- D. Thermal paste
Answer: D
NEW QUESTION # 264
......
CompTIA A+ certification is recognized worldwide and is highly valued by employers. It is an industry-standard certification that demonstrates your proficiency in the IT field. CompTIA A+ Certification Exam: Core 1 certification is offered by the Computing Technology Industry Association (CompTIA), a leading provider of IT certifications. CompTIA A+ Certification Exam: Core 1 certification is valid for three years, after which candidates must retake the exam or earn continuing education credits to maintain their certification.
220-1001 Study Material, Preparation Guide and PDF Download: https://actualtests.vceengine.com/220-1001-vce-test-engine.html
