100% PASS RATE JNCIA-Junos JN0-104 Certified Exam DUMP with 145 Questions
Updates For the Latest JN0-104 Free Exam Study Guide!
The Juniper JN0-104 certification exam is recognized worldwide and is highly valued by the employers. The certification demonstrates the candidate's knowledge and skills in Juniper networking technology and enhances their credibility in the job market. The certification also opens up new job opportunities and career growth prospects for the candidates.
The JN0-104 exam covers a broad range of topics, including networking fundamentals, Junos OS fundamentals, user interfaces, Junos configuration basics, routing fundamentals, routing policy and firewall filters, and Junos services. The exam consists of 65 multiple-choice questions and must be completed within 90 minutes. To pass the exam, a candidate must score at least 65% or higher.
NEW QUESTION # 29
In the MAC address ac:bc:32:a3:4b:7b, what represents the Organizationally Unique Identifier (OUI)?
- A. 32:a3:4b
- B. ac:bc:32
- C. a3:4b:7b
- D. bc:32:a3
Answer: B
NEW QUESTION # 30
With regard to the Junos software architecture, which two of the following are found on all Junos devices? (Choose two.)
- A. application-specific integrated circuits (ASICs)
- B. multiple software daemons
- C. separate management interface (fxp0)
- D. separation of control and forwarding
Answer: B,D
NEW QUESTION # 31
Exhibit:
Refer to exhibit, What will be the result?
- A. The device will boot in a multi-user mode at the configuration prompt
- B. The device will boot in a Single-user mode at the shell prompt
- C. The device will boot in a Single-user mode at the operational prompt
- D. The device will boot in a multi-user mode at the shell prompt
Answer: A
NEW QUESTION # 32
Which statement about the forwarding table is correct?
- A. It is only available on the RE
- B. It is available on both the RE and the PFE.
- C. It contains all known routes including IPv6-
- D. It is only available on the PFE
Answer: D
NEW QUESTION # 33
Which of these commands can be used to troubleshoot routing issues and check the path to the destination 192.168.1.1? (Choose three)
- A. user@router# run traceroute 192.168.1.1
- B. user@router# traceroute 192.168.1.1
- C. user@router> ping record-route 192.168.1.1
- D. user@router# ping record-route 192.168.1.1
- E. user@router> traceroute 192.168.1.1
Answer: A,C,E
NEW QUESTION # 34
Which two statements are true about firewall filter configurations? (Choose two.)
- A. If an action modifier exists without a terminating action, matching packets will be discarded.
- B. Multiple action modifiers can be included in the same term.
- C. If an action modifier exists without a terminating action, matching packets will be accepted.
- D. Only a single action modifier can be included in the same term.
Answer: B,C
NEW QUESTION # 35
What does "ge" represent for the interface ge-0/0/0.0?
- A. GRE
- B. Aggregated Ethernet
- C. Gigabit Ethernet
- D. FastEthernet
Answer: C
NEW QUESTION # 36
Which of these functions are available under the "Maintain" tab of J-Web? (Choose two)
- A. edit security settings
- B. reboot the device
- C. view real-time statistics of interfaces
- D. view and add licenses
Answer: B,D
NEW QUESTION # 37
Select the SONET network elements that are used for troubleshooting (Choose three.)
- A. section
- B. segment
- C. circuit
- D. line
- E. path
Answer: A,D,E
NEW QUESTION # 38
How does the PFE determine how to forward transit traffic?
- A. The PFE performs a destination lookup based on its own routing table.
- B. The PFE determines network destinations itself based on the RE's routing table.
- C. The PFE uses the routing table provided by the RE.
- D. The PFE uses the following table provided by the RE.
Answer: D
NEW QUESTION # 39
Which command will save the current active configuration as the rescue configuration?
- A. user@router# save rescue configuration
- B. user@router# save | rescue
- C. user@router> request system configuration rescue save
- D. user@router> file save rescue-configuration
Answer: C
NEW QUESTION # 40
Which two statements about the configure exclusive command are correct? (Choose two.)
- A. The command excludes other users from editing the configuration.
- B. The command causes the loss of all uncommitted changes when exiting exclusive mode
- C. The command retains all uncommitted changes when exiting exclusive mode
- D. The command allows multiple users to edit private copies of the configuration concurrently.
Answer: B,D
NEW QUESTION # 41
Which of these indicates that you're in operational mode?
- A. user@router#
- B. user@router%
- C. user@router>
- D. user@router*
Answer: C
NEW QUESTION # 42
In dotted decimal notation, what is equivalent of 11001100 10111011 00110010 00111110 ?
- A. 212.188.118.66
- B. 240.4.120.96
- C. 236.146.223.167
- D. 204.187.50.62
Answer: D
NEW QUESTION # 43
What are two benefits realized by the disaggregated Junos? (Choose two.)
- A. The platform drivers and forwarding engineer are removed from the control plane to increase performance.
- B. The architecture facilitates programmability through provisioning the control plane, the data path, and the platform API's.
- C. The Junos VM becomes hardware-independent and can be deployed on any hypervisor without modification.
- D. There is increased flexibility to use different control plane versions.
Answer: A,B
NEW QUESTION # 44
When a system process encounters an error, how does the Junos OS protect the other processes from being impacted?
- A. The Junos OS executes multiple processes simultaneously.
- B. Each process operates in its own shared memory space.
- C. The Junos OS executes only one process at a time.
- D. Each routing protocol runs as an individual process.
Answer: B
Explanation:
Explanation
http://juniper-basic.blogspot.com/2017/02/juniper-basic.html
Junos OS functionality is compartmentalized into multiple software processes.Each process handles a portion of the device's functionality. Each process runs in its own protected memory space, ensuring that one process cannot directly interfere with another. When a single process fails, the entire system does not necessarily fail.This modularity also ensures that new features can be added with less likelihood of breaking current functionality.The Junos OS is the trusted, secure network operating system powering the high-performance network infrastructure offered by Juniper Networks. The Junos kernel is based on the FreeBSD UNIX operating system, which is an open-sourcesoftware system.
NEW QUESTION # 45
Click the Exhibit button
A packet destined to the 172.27. 102.65 IP address is received by the ge-0/0/1.0 interface on your Junos device. The input firewall filter shown in the exhibit is applied to the ge-0/0/1.0 interface.
Which two actions are performed in this scenario? (Choose two.)
- A. The packet is discarded.
- B. The packet is accepted
- C. The packet is logged
- D. The packet is counted
Answer: B,D
NEW QUESTION # 46
Which of these is the decimal equivalent of 100101?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 47
Which output displays that the peer has been selected for NTP synchronization?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 48
......
The Juniper JN0-104 (Junos, Associate (JNCIA-Junos)) Exam is a certification exam that assesses the candidate's knowledge and skills in the field of Juniper Networks Junos OS. Specifically, this exam tests the candidate's understanding of networking fundamentals, Junos OS fundamentals, user interfaces, Junos configuration basics, operational monitoring and maintenance, routing fundamentals, and routing policy and firewall filters. Passing the JN0-104 exam is a prerequisite for pursuing higher-level Juniper certifications, such as the Juniper Networks Certified Professional Security (JNCIP-SEC) or Juniper Networks Certified Internet Specialist (JNCIS) certifications.
Best JN0-104 Exam Preparation Material with New Dumps Questions https://actualtests.vceengine.com/JN0-104-vce-test-engine.html
